What are the precautions for operating PESCO hydraulic shears?
What are the characteristics of the PESCO hydraulic steel-grabbing machine?
2022-12-19
What to use for dismantling scrapped cars?
2022-12-20
1. Before operating the PESCO hydraulic shears, the car must be warmed up, especially in winter.
2. When the hydraulic shear is working, ensure that no one approaches the tooling to avoid injury. Keep your overalls under your control at all times to avoid injury. When using the demolition tool, all personnel should keep a minimum safety distance of 10m. Close all windows, make sure all required guards are in place, and the eagle’s beak cuts the view.
3. When dismantling pipelines, containers, storage tanks, and other facilities that may contain gases, flammables, or dangerous chemicals. Serious personal injury or death may occur. Before construction, ensure that combustible gas has been removed.
4. Cutting train or crane rails, engine crankshafts, weldments, shaft halos, shafts, and other hard metals will increase the wear rate of cutting edges and hydraulic shears.
5. The PESCO hydraulic shears or the demolition tools may be damaged when using the demolition tool to level the construction site or knock down the upright building. Use the correct equipment for site preparation or maintenance operations.
6. Aim the PESCO hydraulic shears at the work area. Operate the shears while moving backward.
7. In order to avoid structural damage to the PESCO hydraulic shears, do not use the method of placing the cutting blade of the hydraulic shear on the road and moving the machine to break the road.
8. To use hydraulic olecranon shears to peel off the road surface, the cutting blade of the fixed claw should be placed between the road surface and the roadbed. Use tooling cylinders to separate the road surface from the roadbed.
In recent years, traditional manual cutting and dismantling have been stretched, high costs and shortage of human resources have become problems, and some new weak links have been exposed in hazardous waste management and environmental protection testing.
Now, the excavator olecranon scissors and the single-cylinder hydraulic shears can replace the traditional manual dismantling work. The rapid decomposition of scrapped cars and the shearing treatment of scrap steel are new working tools in the recycling and dismantling of scrapped cars and the scrap steel recycling and processing industry.
The high-quality hydraulic olecranon scissors are from the PESCO Hydraulic Device. It only takes 30 minutes to disassemble a car under the operation of the seemingly bulky olecranon scissors, while manual work requires 4 people to work for 3 hours to complete.
