What are the vulnerable parts of the PESCO excavator hydraulic crusher?

PESCO excavator hydraulic crushers have been one the most important tools in the construction industry since their birth. The use of hydraulic pulverizers is not difficult, just follow the instructions. When using it, we must be careful about its accessories, which are relatively easy to damage. Below, PESCO Hydraulic Device will introduce to you several easily damaged accessories of the hydraulic pulverizer:

1. Crush the teeth of the pliers. When teeth are severely deformed, it can be very difficult to replace them. Therefore, after every 100 to 150 hours of work, some wear-resistant electrodes should be welded on the teeth. To increase the wear resistance of the teeth, the crushing pliers must be made of PESCO Hydraulic Device. When using the front teeth, do not hit hard objects forward to avoid damage.

2. Blade. Alloy blades are usually inside the jaws of hydraulic pulverizers, with two blades on the upper and lower blades. The blade is mainly used to cut steel bars. If it is used to cut concrete or steel beyond the shear range. It will cause the blade to be worn or damaged and cannot be used. In this case, the blade must be replaced, so be careful when using it.

3. The easily damaged accessories of the hydraulic pulverizer also include the front cover of the piston rod, the pin shaft, the oil pipe joint, the hydraulic seal, the bolt of the cylinder bracket, the hydraulic hose, etc.

Therefore, every excavator should always be equipped with these accessories in case of emergency. In addition, hydraulic seals need to be replaced every 600 hours in actual operation.

Hydraulic crushing pliers are widely used in static demolition and non-destructive crushing of reinforced concrete. Different connecting plates can be selected according to the thickness of the crushed objects to meet various construction requirements.

PESCO excavator hydraulic crushers are from the official account PESCO Hydraulic Device, the crushing pliers have static crushing, no vibration, and ensure structural safety; no dust, no noise, small broken pieces, and easy to clean and transport;

Hydraulic crushing pliers can retain the steel bars to meet the design requirements; fast and efficient crushing is low in cost and is suitable for widely used in static crushing, floors, concrete beams, concrete walls, and concrete column cornices. PESCO excavator hydraulic crusher works such as stair demolition or concrete hydraulic crushing tongs and walls.